Description

Product Introduction:

This product is an elastic anti-crack coating for building exterior walls developed to cope with the failure of buildings to prevent cracks. It is refined from imported highly elastic self-crosslinking pure propylene glycol emulsion, nano-additives and high-quality pigments and fillers. It has elastic function, can repair cracks and self-cleaning function, has good anti-fouling properties, enhanced application power and gloss protection. Color, rich and bright colors, scrub-resistant, non-toxic and odorless.

Main Feature:

*High-end water-based environmentally friendly exterior wall finishing paint, noble and elegant, with an elasticity rate greater than 240%

*Strong hiding power, dense coating, and breathable function

*Excellent adhesion, long-lasting wall protection, weather resistance, and anti-powdering

Technical Parameters:

Implementation standard: JG/T172-2014

Theoretical paint consumption: about 4 square meters/kg/two coats when used for covering

Drying time: 1 hour to surface dry (at an ambient temperature of 23°C and a relative humidity of 50%)

Dry for 2 hours (at an ambient temperature of 23°C and a relative humidity of 50%)

Recoating time: 24 hours (at an ambient temperature of 23°C and a relative humidity of 50%)

Elasticity rate: >240%

Contrast ratio: ≥0.90

Aging resistance: 400 hours

Shelf life: 12 months from the date of production (unopened)

Use reference:

*Substrate: should be solid, clean, dry (moisture content ≤ 10%), PH ≤ 10; for powdered substrates, use tools such as a spatula or wire brush to remove the powdered layer and completely remove mold spots.

*Old paint film: Check the aging of the old paint film, and loose parts should be completely removed

*Salting out: It is recommended to treat with oxalic acid solution of appropriate concentration (the specific concentration should be determined according to the degree of salting out, but the concentration generally does not exceed 5%), then rinse with clean high-pressure water and dry

*Construction method: either roller coating or spraying

*Dilution: Dilute with water, preferably no more than 15%

*Utensil cleaning: Wash with clean water in time after construction is completed

*Safety and labor protection: Safety measures should be taken during construction and labor protection clothing should be worn.

Supporting system: JD4001, JD4004, JD4009

Environmental Requirements:

*Stored in a dry and ventilated warehouse at 5~35℃

*Construction environment: temperature ≥ 5℃ (base temperature ≥ 10℃), humidity ≤ 85%, no rain, snow, fog, wind power ≤ level 4

*Transportation: handled as non-dangerous goods, protected against freezing and exposure to sunlight