Description

Product Introduction:

This product is an elastic anti-cracking paint for building exterior walls developed to cooperate with building wall crack prevention. It is refined from imported highly elastic self-crosslinking pure acrylic emulsion, nano-additives and high-quality pigments and fillers. It has elastic function, can compensate for fine cracks, has self-cleaning function, has good anti-pollution performance, excellent adhesion and gloss retention. Color retention, rich and beautiful colors, scrub-resistant, non-toxic and odor-free.

Product Features:

*High-end water-based environmentally friendly exterior wall finishing paint, noble and elegant, with an elasticity rate greater than 200%

*Strong hiding power, dense coating, and breathable function

*Excellent adhesion, long-lasting wall protection, weather resistance, and anti-powdering

Scope of application:

It can effectively compensate for wall cracks and is widely used in high-end decoration and protection of exterior walls of various buildings.

Technical Parameters Implementation Standard: JG/T172-2014

Theoretical paint consumption: about 4 square meters/kg/two coats when used for covering

Drying time: 1 hour to surface dry (at an ambient temperature of 23°C and a relative humidity of 50%)

Dry for 2 hours (at an ambient temperature of 23°C and a relative humidity of 50%)

Recoating time: 24 hours (at an ambient temperature of 23°C and a relative humidity of 50%)

Elasticity rate: >200%

Contrast ratio: 0.90

Aging resistance: 400 hours

Shelf life: 12 months from the date of production (unopened)

Use Reference:

*Substrate: should be solid, clean, dry (moisture content ≤ 10%), PH ≤ 10; for powdered substrates, use tools such as a spatula or wire brush to remove the powdered layer and completely remove mold spots.

*Old paint film: Check the aging of the old paint film, and loose parts should be completely removed

*Salting out: It is recommended to treat it with an oxalic acid solution of appropriate concentration (the specific concentration should be determined according to the degree of salting out, but the concentration generally does not exceed 5%), then rinse with clean high-pressure water and dry

*Construction method: either roller coating or spraying

*Dilution: Dilute with water, preferably no more than 15%

*Utensil cleaning: Wash with clean water in time after construction is completed

*Safety and labor protection: Safety measures should be taken during construction and labor protection clothing should be worn.

Supporting system: JD4001 alkali-resistant primer, JD4004 universal sealing primer

Packaging Specifications:

22kg iron drum packaging

Environmental Requirements:

*Stored in a dry and ventilated warehouse at 5~35℃

*Construction environment: temperature ≥ 5℃ (base temperature ≥ 10℃), humidity ≤ 85%, no rain, snow, fog, wind power ≤ level 4

*Transportation: handled as non-dangerous goods, protected against freezing and exposure to sunlight