Description

Product Introduction:

This product is a water-based architectural paint with a decorative effect similar to marble and granite. It is mainly made of a variety of selected natural stone powders and processed by unique techniques.

Main Feature:

*Has the natural color of natural stone

*High bonding strength*Non-toxic, safe and environmentally friendly

*Fireproof, waterproof, alkali-resistant, pollution-resistant

*Never fade

*Good water, alkali and weather resistance.

*Can effectively prevent the external harsh environment from corroding the building

Base treatment and construction methods

1. The base material should be smooth, strong, dry, clean, and free of oil and dust. The pH value of the substrate should be less than 10. Moisture content should be less than 10%.

2. Before construction, a special sealing primer for stone paint needs to be applied. Set lattice seams according to design requirements, and areas not to be sprayed should be covered and protected.

3. After stirring the stone paint evenly, put the materials into a special spray gun for construction. For special colors, use a double-nozzle spray gun or multiple spray guns for mixed spraying.

4. The spraying pressure is 0.4-0.8Mpa. First, quickly spray a thin layer of stone paint to allow the subsequent stone paint to adhere, and then spray slowly, steadily and evenly. After spraying, the dividing lines should be drawn out immediately (except for embedded lines)

5. Appropriately increasing the distance between the nozzle and the airflow port can produce a larger dot effect with stronger concavity and convexity; when the nozzle and airflow port are closer, small dots and a flatter appearance surface will be obtained.

6. After the stone paint is completely dry for more than 24 hours, polish the surface appropriately and remove dust.

7. Overlay: Use a spray gun to load the overcoat and spray it evenly and thinly on the stone paint surface. You can also use the roller and brush method to directly roll and brush on the stone paint surface.

8. Stir thoroughly before construction.

Technical Parameters:

Implementation standard: JG/T24-2018

Theoretical consumption: 3.5-4.2kg/m2

Drying time: 4 hours to surface dry (at an ambient temperature of 23°C and a relative humidity of 50%)

Hard work for 8 hours (at an ambient temperature of 23°C and a relative humidity of 50%)

Recoating time: 24 hours (at an ambient temperature of 23°C and a relative humidity of 50%)

Shelf life: 6 months from the date of production (unopened)

Packaging Specifications:

30Kg/barrel iron barrel packaging

Environmental requirements:

*Stored in a cool place with a temperature of 5-35℃.

*Construction environment: temperature ≥ 5℃ (base temperature ≥ 10℃), humidity ≤ 85%, no rain, snow, fog, wind power ≤ level 4

*Transportation: handled as non-dangerous goods, protected against freezing and exposure to sunlight