Description

Detailed Introduction：

This product is an economical and environmentally friendly interior wall coating material. It has good adhesion, is easy to construct, economical, non-toxic and has no odor. It is an ideal choice for economical home decoration and public space decoration. Color mixing is not recommended.

Main Feature：

*This product has been certified by the China Environmental Labeling Certification Committee

* Economical and environmentally friendly interior wall finishing paint with high cost performance, the first choice for engineering interior walls

*Strong covering power and scrub resistance

*Excellent adhesion, long-term protection of the wall

*Soft gloss, easy to apply

Scope of application：

It can be widely used in the decoration and protection of various interior walls, especially factories, workshops, residences and public walls.

Technical Parameters：

Implementation standards: GB/T9756-2018, GB18582-2020

Theoretical paint consumption: 3~4 square meters/kg/two coats (calculated based on dry film thickness of 30 microns)

Drying time: 1 hour to surface dry (ambient temperature 23℃ and relative humidity 50%)

Dry for 2 hours (at an ambient temperature of 23°C and a relative humidity of 50%)

Recoating time: 4 hours (at an ambient temperature of 23°C and a relative humidity of 50%

Contrast ratio: ≥0.90

Scrub resistance: ≥350 times

Shelf life: 12 months from the date of production (unopened)

Use reference：

Please read the instructions for use before construction

*Substrate: should be solid, clean, dry (moisture content ≤10%), PH<10; for powdered substrates, use tools such as a spatula or wire brush to remove the powdered layer and completely remove mold spots.

*Old paint film: Check the aging of the old paint film, and loose parts should be completely removed

*Salting out: It is recommended to treat with oxalic acid solution of appropriate concentration (the specific concentration should be determined according to the degree of salting out, but the concentration generally does not exceed 5%), then rinse with clean high-pressure water and dry

*Construction method: either roller coating or spraying

*Dilution: Generally, there is no need to add water to dilute it. If the material is thick, you can add no more than 5% water to dilute it.

*Utensil cleaning: Wash with clean water in time after construction is completed

*Safety and labor protection: Safety measures should be taken during construction and labor protection clothing should be worn.

*Supporting system: NQ-401 “Meidi” alkali resistant primer

Packaging specifications:

25kg iron drum packaging

Environmental requirements：

*Stored in a dry and ventilated warehouse at 5~35℃

*Construction environment: temperature ≥5℃ (base temperature ≥10℃), humidity ≤85%

*Transportation: handled as non-dangerous goods, protected against freezing and exposure to sunlight