Description

【Product Introduction】

E159X epoxy primer is a solvent-based two-component epoxy resin coating. This product has the characteristics of good penetration, strong adhesion, durability, acid and alkali resistance, and is waterproof and mildew-proof. Suitable for the treatment and protection of base floors and walls.

【Application Scope】

Industrial plants, warehouses, underground parking lots, office spaces, etc.

【Material Advantages】

● The material has good permeability and is suitable for all kinds of floors.
● Good adhesion and can form an excellent dense coating with the substrate
● Good applicability and can form good coatings with a variety of materials

【Product Information】

The material is divided into two components: A and B.
Component A transparent liquid 18kg/barrel
Component B light brown liquid 4.5kg/barrel
Ratio: A component: B component = 1:1
Packaging: Printed metal packaging drum. It is recommended to stack it in three layers when stacking.
Storage: The storage temperature is 5-35℃. It should be stored in a cool, ventilated and dry warehouse.
Keep away from fire and heat sources, and strictly prohibited from exposure to the sun

【Technical Data】

Solid content: >45%
Sandability: Easier to sand, non-stick sandpaper
Bonding strength: >2.56Mpa
Hardness: >1H
Flash point: 23℃

【System information: 1mm thick and thin coating epoxy floor system】

Bottom layer: Apply 1-2 coats of E159X epoxy primer
Intermediate leveling layer: E337 epoxy intermediate paint can be used with sand and 1-2 coats of scraping
Surface layer: Apply 2 coats of E550 epoxy topcoat
You can also apply E860 epoxy topcoat once

【System recommended dosage】

【Grassroots Requirements】

The grade of the concrete floor should be greater than C25, the tensile strength should be ≥1.5Mpa, and the flatness should be ±4mm/2m ruler, the base surface must be dry, clean, free of oil and other contaminants

【Basic Treatment】

Use a floor grinder to grind the entire ground to be constructed to remove floating dust and protruding concrete residues on the surface of the base layer.

【Construction Conditions】

Ground base temperature: 5-35℃
Construction epoxy temperature 5-35℃
Ground base moisture content: <8%
Relative humidity of construction environment: <80%

【Construction methods/tools】

This paint is generally applied by scraping or rolling.
Tools used: trowel, roller brush

【Available Time】

The ambient temperature is 10℃ and it can be used for 180 minutes.
The ambient temperature is 20℃ and it can be used for 120 minutes.
The ambient temperature is 30℃ and it can be used for 60 minutes.

【Construction interval】

The construction environment temperature is 5-15℃ and the construction interval is 24 hours.
The construction environment temperature is 15-20℃ and the construction interval is 12 hours.
The construction environment temperature is 20-30℃ and the construction interval is 8 hours.

【Safeguard】

Materials should be stacked in a centralized and orderly manner, with police lines and warning signs around them.
Remember, open flames are strictly prohibited on site.
During construction, workers should wear labor protection equipment to ensure the safety of themselves and others.
When the construction site is closed, ventilation should be done well.

【Precautions】

This product is a two-component product. The two components A and B should be thoroughly mixed before use.
The next step of construction can only be carried out after the product is fully dry.
Note that epoxy products are two-component curing materials. When preparing coatings, you must read the labels clearly, do not mix them up, do not violate the mixing ratio, and use them up as soon as possible and within the applicable time.

【First-aid】

Skin Contact: Wash with plenty of water and remove contaminated clothing and shoes.
Eye contact: Rinse with running water or saline and seek medical attention if necessary.
Inhalation: Move to fresh air, keep respiratory tract open, seek medical advice if you feel unwell.
Ingestion: Clean mouth, induce vomiting, seek medical advice.

【Fire-fighting measures】

Hazardous characteristics: Can burn when exposed to open fire. Harmful combustion products: CO, CO2, etc. Fire extinguishing methods and extinguishing media: dry powder, carbon dioxide, sand.

Evacuate nearby and surrounding personnel. Fire extinguishers should wear pressure oxygen breathing apparatus and spray containers exposed to the fire with water to cool them and disperse and evaporate them.